Product ID:JOINT GUARD, PART A
MSDS Date:01/01/1991
FSC:6850
NIIN:00D002636
MSDS Number: BJYDG

GARON PRODUCTS, INC.

1924 HIGHWAY 35 CN-20
WALL, NJ 07719
US

Emergency Phone: 908-449-1776

Info Phone: 908-449-1776

Cage: EO138

GARON PRODUCTS, INC.

WALL, NJ 07719 US

Telephone: 908-449-1776

Cage: EO138

BUTYL BENZYL PHTHALATE

CAS: 68-38-7

EPOXY RESIN

CAS: 25068-38-6

RTECS: KC2100000

ALKYL GLYCIDAL ETHER

CAS: 68609-97-2

LD50 LC50 Mixture:ORAL LD50 (RAT) IS UNKNOWN.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE SEVERE EYE IRRITATION ON
DIRECT CONTACT. VAPORS FROM HEAT CURE AND DUST FROM GRINDING,
SANDING, ETC. MAY CAUSE EYE AND RESPIRATORY SYSTEM IRRITATION.
PROLONGED OR REPEATED SKIN CONTACT MAY P RODUCE SKIN IRRITATION.
MAY CAUSE AN ALLERGIC SKIN REACTION. INGESTION MAY CAUSE DIGESTIVE
SYSTEM IRRITATION.
Explanation of Carcinogenicity:NONE OF THE COMPOUNDS IN THE FORMULATION
ARE LISTED AS CARCINOGENS BY NTP, IARC, OR OSHA.
Effects of Overexposure:MAY CAUSE EYE, SKIN & RESPIRATORY TRACT
IRRITATION. MAY CAUSE AN ALLERGIC SKIN REACTION IN CERTAIN
SUSCEPTIBLE INDIVIDUALS. INGESTION MAY CAUSE NAUSEA, VOMITING, AND
DIARRHEA.
Medical Cond Aggravated by Exposure:INDIVIDUALS WITH PRE-EXISTING SKIN
DISORDERS ARE AT A GREATER THAN NORMAL RISK WHEN EXPOSED TO THIS
MATERIAL.

First Aid:INHALATION: REMOVE PERSON TO FRESH AIR. CALL A PHYSICIAN.
EYE: FLUSH IMMEDIATELY WITH LARGE AMOUNTS OF WATER FOR 15 MINUTES.
GET MEDICAL ATTENTION. SKIN: REMOVE CONTAMINATED CLOTHING. WASH
WITH SOAP A ND WATER PROMPTLY. INGESTION: INDUCE VOMITING WITH 2
TABLESPOONS OF SYRUP OF IPECAC. GET IMMEDIATE MEDICAL ATTENTION.

Flash Point:>250F,>121C
Extinguishing Media:USE CARBON DIOXIDE, FOAM, OR DRY CHEMICAL. WATER
MAY BE INEFFECTIVE.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS. COOL FIRE EXPOSED
CONTAINERS WITH WATER SPRAY. CONTAIN RUNOFF.
Unusual Fire/Explosion Hazard:COMBUSTION OR HEAT OF FIRE MAY PRODUCE
HAZARDOUS DECOMPOSITION PRODUCTS AND VAPORS.

Spill Release Procedures:VENTILATE AREA. COLLECT SPILLED MATERIALS WITH
AN ABSORBENT. FLUSH AREA WITH WATER TO REMOVE RESIDUE. PLACE IN A
DOT APPROVED METAL CONTAINER AND SEAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:PREVENT CONTACT WITH EYES AND SKIN.
KEEP CONTAINER CLOSED WHEN NOT IN USE. FOR INDUSTRIAL OR
PROFESSIONAL USE ONLY. FOR IMMEDIATE USE WHEN MIXED.
Other Precautions:THIS PRODUCT CONSISTS OF TWO COMPONENTS. THE
PRECAUTIONS FOR EACH COMPONENT SHOULD BE OBSERVED WHEN SEPARATE OR
MIXED. KEEP OUT OF THE REACH OF CHILDREN.

Respiratory Protection:NONE NORMALLY REQUIRED. USE NIOSH/MSHA APPROVED
DUST RESPIRATOR WHEN GRINDING OR SANDING CURED MATERIAL.
Ventilation:PROVIDE SUFFICIENT LOCAL & MECHANICAL(GENERAL) VENTILATION
IN PATTERN/VOLUME TO CONTROL INHALATION EXPOSURES.
Protective Gloves:IMPERVIOUS GLOVES (RUBBER OR COTTON)
Eye Protection:CHEMICAL SAFETY GOGGLES OR GLASSES.
Other Protective Equipment:WEAR INDUSTRIAL-TYPE WORK CLOTHING.
Work Hygienic Practices:WASH THOROUGHLY AFTER USE AND BEFORE EATING OR
SMOKING. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
THIS IS A TWO PART PRODUCT. EMPTY CONTAINERS MAY RETAIN PRODUCT RESIDUE
OR VAPORS. AIRBORNE PARTICULATE MAY BE GENERATED DURING REMOVAL
OPERATIONS INCLUDING ABRASIVE BLASTING, SANDING OR GRINDING.

HCC:N1
Boiling Pt:B.P. Text:280F,138C
Vapor Density:>1 AIR=1
Spec Gravity:1.13
Evaporation Rate & Reference:<1 ETHER=1
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS, AMINES, MERCAPTANS, BASES, EPOXY
RESINS.
Stability Condition to Avoid:HIGH HEAT, OPEN FLAMES AND OTHER SOURCES
OF IGNITION
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
ALDEHYDES, ACIDS, AND OTHER DECOMPOSITION PRODUCTS WHEN SUBJECTED
TO HIGH HEAT OR FLAME
Conditions to Avoid Polymerization:STRONG ACIDS, AMINES, MERCAPTANS,
BASES, EPOXY RESINS

Waste Disposal Methods:DISPOSE OF I/A/W LOCAL, STATE AND FEDERAL LAWS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.